Why Hayward Swimming Pool Vacuum does not reach farthest point in pool?
If your Hayward Swimming Pool Vacuum does not reach the farthest point in the pool, the hose might be too short. Add an extra hose section if necessary.
General| Cable Length | 60 ft |
|---|---|
| Type | Robotic |
| Filter Type | Debris Canister |
| Cleaning Area | Up to 20 x 40 ft |
| Suitable for Pool Types | In-ground pools |
| Cleaning Pattern | Random |
| Warranty | 2 years |
Do not use the cleaner to remove large debris in new pools.
Remove the cleaner from the pool before chemically shocking it.
Do not swim in the pool while the cleaner is operating.
Store the cleaner in a shaded, safe area with hoses stored straight.
Keep the cleaner and its components away from children and pets.
Remove the cleaner when performing a pool backwash.
Manually remove large debris before cleaner operation, especially after storms.
Perform a backwash and clean filter, skimmer, and pump baskets.
Maintain specific pH, Chlorine, and Total Alkalinity levels for operation.
Instructions for connecting to a dedicated return line with specific fittings.
Instructions on installing the universal wall fitting, using Teflon tape for plastic threads.
Measure hose length to the farthest point, add 3-4 feet, and cut excess, adjusting floats accordingly.
Ensure the debris bag is properly attached and not pinched during installation.
Learn how to detach the debris bag by pulling the frame back and up.
Tips for cleaning the debris bag, noting that drying makes debris removal easier.
Use a flat blade screwdriver to set the wall quick connect to 23 PSI (+/- 3).
Describes pool coverage and normal cleaning cycle duration, noting minimum water depth.
Instructions for switching between Bottom to Skim and Skim to Bottom modes.
Adjust sweep hose power by turning the knob counter-clockwise for slow movement, clockwise for excessive spraying.
Procedure for safely disconnecting and removing the cleaner from the pool.
Instructions for cleaning the in-line filter, checking the o-ring, and noting potential plumbing issues.
Instructions for replacing the sweep hose, including part number.
Guidance on replacing sweep hose rollers when worn to the outer groove, with part number.
Information on when and how to replace the debris bag, including part numbers.
Procedure for replacing swivels if they cease to turn or leak, with part number.
Instructions for replacing tires when wear marks appear, including part number and quantity.
Guidance on replacing side rollers when they wear down, with part number and quantity.
Details the limited warranty period for TriVac 500 (1 year) and TriVac 700 (2 years) against defects.
To Next Page