DIS2116
4
HBM A2540-1.1 en/de
Typographical conventions
For clear identification and improved legibility, the following conventions have
been used in this documentation:
NOTE
Important paragraphs are marked with a symbol to draw attention to
them.
Italics Indicates external documents and files
“MODE” All menus and menu commands appear in quotes, here the
main menu “MODE”.
“ENTER” Quotes and italics are used for keys, input fields and user
input.
TAR Bold is used for communication commands.
Er1250
Underlined normal print is used for error messages.
Important information
NOTE
Neither the design of the device nor any technical safety aspects may be mo-
dified without the express permission of Hottinger Baldwin Messtechnik
GmbH. Any modification excludes Hottinger Baldwin Messtechnik GmbH from
any and all liability for any damage resulting therefrom.
When replacing the battery for the real-time clock, the device must be discon-
nected from the power supply (service life y 5 years).
It is strictly forbidden to carry out any repairs and soldering work on the mo-
therboards or to replace any components. Repairs may only be carried out by
persons authorized by Hottinger Baldwin Messtechnik GmbH.
The production number set at the factory cannot be changed.
When connecting the cables, the device must be disconnected from the vol-
tage supply.
To Next Page
Loading...
