EasyManua.ls Logo

HEADRUSH FRFR-GO - (8.0) Appendix; (8.1) Technical Specifications; (8.2) Trademarks & Licenses

HEADRUSH FRFR-GO
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
(8.0) Appendix
(8.1) Technical Specifications
Output Power (peak)
30W (2x15W) when using main power, 24W (2x12W) when using battery power
Drivers
(2) 3” full-range drivers at 4 Ω
Maximum SPL
109.4 dB (peak)
Frequency Response
75 Hz – 20 kHz (-10 dB)
Connectors Input: 1/4" (6.35 mm) line-level amp modeler mono input
Aux Input: 1/8" (3.5 mm) line-level stereo input
Headphones Output: 1/8" (3.5 mm) stereo output
Amp Modeler Max Input Level
0 dB
Headphone Impedance
22 Ω (typical 282mW per channel, <1% THD using 32Ω impedance headphones)
Bluetooth Version: 5.0
Profile: A2DP, AVRCP
Codec: SBC
Range: up to 100 feet (30.5m)
Power Connection: C7 power cable
Input Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz
Consumption: 45 W
Battery Type: Rechargeable lithium-ion
Recharge Time: Up to 3 hours
Battery Life: Up to 13 hours (may vary depending on use conditions)
Protection
Electronic soft clip, thermal, and transducer overdrive protection
Enclosure
Vinyl-wrapped MDF with cloth grille and rear bass port
Operating Temperature
0°C to 45°C (32°F to 113°F)
Dimensions
(width x depth x height)
12.6" x 5.91" x 7.24" (320 x 150 x 184 mm)
Weight
7.39 lbs. / 3.35 kg
Specifications are subject to change without notice.
(8.2) Trademarks & Licenses
HeadRush is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by HeadRush is under license.
All other product names, company names, trademarks, or trade names are those of their respective owners.

Related product manuals