HEADRUSH FRFR-GO - (4.3) Example B: Two FRFR-Gos (Stereo); (4.4) Example C: One FRFR-GO (Stereo) aux Input

6
(4.3) Example B: Two FRFR-GOs (Stereo)
Items not listed under (1.1) Introduction > Box Contents are sold separately.
Connect the Right and Left (Mono) outputs of your or guitar bass multi-FX/amp modeling pedal to the inputs of
your FRFR-GO.
(4.4) Example C: One FRFR-GO (Stereo) AUX Input
Connect the Right and Left (Mono) outputs of your or guitar bass multi-FX/amp modeling pedal using a “Y” cable -
(2) 1/4" TS to (1) 1/8" TRS, to the AUX input of your FRFR-GO.
Guitar
Power
Multi-FX/amp modeling pedal
Power
Multi-FX/amp modeling pedal