GPX_UsersGuide_en.pdf [rev. 002] - 1 -
http://www.gi-pro.net
GIpro X-type
Gear Position Indicator with programmable
Shift Light and High Speed Warning
User’s Guide
1. Foreword
Congratulations on your purchase of a GIpro X-type gear position indicator.
The GIpro products from HealTech Electronics Ltd. are the most advanced gear
position indicators on the market today.
This GIpro model will fit all motorcycles and vehicles which have an electronic
speedometer (either analogue or digital readout).
Your speedometer is electronic if the odo/tripmeter has LCD readout.
If your speedometer is cable driven, it is still possible to install this product with
our GPX-WSS harness kit.
Due to a modern microprocessor and sophisticated firmware, the GIpro-X offers
faster and more reliable readings than competing products.
The unit is also the smallest, most compact gear indicator available, making it
easy to mount at the instrument cluster.
The display is auto-learning, there are no buttons and no “programming wire”.
2. Operation
Your motorcycle is not equipped with a Gear Position Sensor, therefore
determining and displaying the gear in use is only possible when the engine is
running and the clutch is fully released.
At other times (clutch pulled-in, engine not running, bike stopped) the display
will show a “-“ sign.
The GIpro will NOT show an incorrect gear in any circumstances, except for a
split second when the clutch is released slowly (slipping) during a back shift.
3. Installation
The Harness Kit required for the installation is supplied separately. Along with
the Display unit, please make sure to order the correct wiring harness kit for
your bike. Please refer to the install instructions received with the Harness Kit.
To Next Page
Need help?
General
