Why do Health O Meter 500KL say 'Lo'?
If your Health O Meter Scales show a “Lo” message, this indicates that the batteries are low. You should replace the batteries as per the provided instructions.
Why are my Health O Meter Scales giving the wrong weight?
If your Health O Meter Scales are giving questionable weight readings or not zeroing, it could be due to several reasons: 1. Something might be interfering with the scale (remove the object). 2. The display didn't show “0.0” before weighing (ask the patient to get off, zero the scale, and restart). 3. The scale isn't on a level floor (place the scale on a level floor). 4. The scale is out of calibration (check the weight with a known weight).
What to do if Health O Meter 500KL display shows “Over” message?
If your Health O Meter Scales display shows 'Over', it means the weight on the scale exceeds its maximum capacity of 500 lb / 220 kg. Remove some weight to bring it within the scale's limits.
Why weighing process on Health O Meter 500KL takes too long?
If the weighing process on your Health O Meter Scales takes too long and the weight doesn't lock on the display, it might be because the patient is not standing still. Ask the patient to remain still during the weighing process.
General| Graduation | 0.2 lb / 0.1 kg |
|---|---|
| Auto-On | Yes |
| Auto-Off | Yes |
| Display | LCD |
| Functions | Weight |
| Capacity | 500 lb / 220 kg |
To Next Page
