To Next PageTo Next PageWhy my Health O Meter Scales does not turn on?
If your Health O Meter Scales does not turn on, here are some things to check: * **Battery Problem**: Examine and replace the batteries. * **Bad Power Supply**: Check or replace the power supply adapter. * **Electrical Outlet**: Try using a different electrical outlet.
How to fix questionable weight on Health O Meter 553KL?
If you are getting a questionable weight or the Health O Meter Scales doesn't zero, consider these potential causes: * **External Interference**: Ensure no object interferes with the scale, and it's not touching the wall. * **Incorrect Zeroing**: Make sure the display shows “0.0” before weighing. Ask the patient to step off, zero the scale, and restart the weighing process. * **Uneven Surface**: Place the scale on a level surface. * **Calibration**: Check the weight using a known weight value, following the calibration procedure.
How to fix Health O Meter 553KL that does not turn on?
If your scale isn't turning on, the possible causes include: 1. A dead battery. 2. A faulty electrical outlet. 3. A bad power supply. Here’s how to troubleshoot: * Replace the batteries. * Try a different outlet. * Replace the AC adapter.
What to do if Health O Meter 553KL Scales shows “OVER”?
If the display shows “OVER”, it means the load on the scale exceeds its capacity. Remove the excess weight and ensure you are using the scale within its specified limits: 553KL: 44 lb / 20 kg; 553KG: 20 kg.
Why Health O Meter 553KL Scales is showing questionable weight or not zeroing?
If you are experiencing questionable weight readings or the scale is not zeroing, consider the following possibilities: 1. An external object may be interfering with the scale. 2. The display may not have shown “0.0” before you started weighing. 3. The scale might not be placed on a level surface. 4. The scale may be out of calibration. To resolve this: * Remove any interfering objects. * Remove the patient, zero the scale, and begin the weighing process again. * Place the scale on a level surface. * Check the weight with a known weight value.
What to do if Health O Meter Scales displays “UNDER”?
If the display shows “UNDER”, it indicates a negative weight, meaning a tare was present, or the load on the scale is below the initial zero point. To fix this, clear any weight from the scale and re-zero it by pressing the ZERO/CLEAR button.
What to do if Health O Meter 553KL Scales shows “OVER” in display?
If the Health O Meter Scales displays “OVER”, it means the weight on the scale is exceeding its maximum capacity. Remove the weight, turn the scale off, then turn it on again, and reattempt the measurement.
What to do if Health O Meter Scales displays “LobAt”?
If your Health O Meter Scales displays “LobAt”, it means the batteries are low. You should replace the batteries following the instructions provided.
What does “UNDER” mean on Health O Meter Scales display?
If the Health O Meter Scales displays “UNDER”, it indicates a negative weight because a tare was present, meaning the load on the scale is below the initial zero point. Remove any weight from the scale and re-zero it by pressing the ZERO/CLEAR button.
General| Display | LCD |
|---|---|
| Units | lb / kg |
| Weight Increment | 0.2 lb / 0.1 kg |
| Power Source | 6 C batteries (not included) or AC adapter (ADPT13, included) |
| Graduation | 0.2 lb / 0.1 kg |
| Auto-On/Auto-Off | Yes |
| Low Battery Indicator | Yes |
| Overload Indicator | Yes |
| Type | Digital |
| Weight | 3.5 lb |
Covers intended use, injury prevention, and patient/caregiver safety during operation.
Instructions for battery operation and AC adapter usage, including safety precautions.
Overview of scale technology, capacity, resolution, power, environment, and dimensions.
Explains the meaning of symbols used on the scale and in the manual.
Lists certifications like ISO 13485 and MET US standards.
Instructions on how to properly dispose of the scale as electronic waste.
Information on connecting the scale to other electronic devices for data transmission.
Guides for inserting batteries and connecting the AC adapter for power.
Details on manual power off and the auto-off feature, including how to manage it.
Step-by-step procedure for weighing patients and using the zero/clear (tare) function.
Instructions for changing and locking the weight unit to KG or LB on the 553KL model.
General precautions and checks before use or after periods of non-use.
Proper procedures for cleaning the scale using recommended methods.
Information on available replacement parts and how to obtain them.
Step-by-step instructions for calibrating the scale using specified weights.
A table listing common symptoms, their causes, and corrective actions.
Details what the 2-year warranty covers, who is covered, and exclusions.
Instructions on how to contact support and return the product for warranty service.
Information about the optional ScaleSurance extended warranty program.
