Why my Health O Meter 524KL does not turn on?
If your Health O Meter Scales doesn't turn on, the possible causes are: 1. Dead battery: Replace the batteries. 2. Faulty electrical outlet: Try using a different outlet. 3. Bad power supply: Replace the AC adapter.
Why Health O Meter 524KL shows questionable weight?
If your Health O Meter Scales displays a questionable weight or does not zero, it could be due to several reasons: * An external object is interfering with the scale. Remove any objects that might be affecting the scale. * The display did not show “0:0.0” before weighing. Remove the patient, zero the scale, and begin the weighing process again. * The scale is not on a level surface. Place the scale on a level surface and restart the weighing process. * The scale is out of calibration. Check the weight using a known weight value.
What to do if Health O Meter 524KL Scales display shows “Lo” message?
If the display of your Health O Meter Scales shows a “Lo” message, it means the batteries are depleted. Replace the batteries according to the provided instructions.
How to fix long weighing process on Health O Meter 524KL?
If the weighing process on your Health O Meter Scales takes too long and the weight doesn't lock, it's likely because the patient is not sitting still. Try to ensure the patient remains still during the weighing process.
What does “Over” message mean on Health O Meter 524KL?
If your Health O Meter Scales displays an “Over” message, it indicates that the load on the scale exceeds its capacity (50 lb / 23 kg). Remove the excess weight and ensure you are using the scale within its specified limits.
General| Type | Digital |
|---|---|
| Display | LCD |
| Power Source | 4 AAA batteries |
| Auto Shut-Off | Yes |
| Capacity | 400 lb |
| Graduation | 0.2 lb |
| Units | lb / kg |
| Functions | Weight |
| Weight | 4.5 lb |
Safety considerations for patients and caregivers during weighing operations.
Guidelines for using the scale with batteries, including low battery indicators.
Safety guidelines for using the optional AC adapter, including connection and voltage.
Details on capacity, resolution, power, environmental factors, and dimensions.
Step-by-step guide for installing and powering the scale with batteries.
Procedure for weighing a patient, including stable weight lock and capacity limits.
Instructions for calibrating the scale using specific weight increments.
Guide to resolving common scale problems like not turning on or zeroing.
Procedure for checking and ensuring the load cell connector is properly plugged in.
To Next Page
