To Next PageTo Next PageWhat to do if the display shows “Over” on Health O Meter Medical Equipment?
If the display of your Health O Meter Medical Equipment shows “Over”, it means the load on the scale is more than it can handle (600 lb / 270 kg). Remove some weight to bring it within the scale's capacity.
How to troubleshoot a Health O Meter Medical Equipment scale that does not power on?
If your Health O Meter Medical Equipment scale won't turn on, first, replace the batteries as they might be dead. If that doesn't work, try plugging the scale into a different electrical outlet, as the original outlet may be faulty. Finally, the AC adapter might be bad, so consider replacing it.
What does 'Lo bAtt' mean on my Health O Meter Medical Equipment?
If the display of your Health O Meter Medical Equipment shows “Lo bAtt”, it means the batteries are low. Replace them following the instructions.
General| Resolution | 0.2 lb / 0.1 kg |
|---|---|
| Display | LCD |
| Auto-On/Off | Yes |
| Low Battery Indicator | Yes |
| Type | Digital Physician Scale |
| Units | lb / kg |
| Functions | Weight measurement |
Defines the professional medical environment and intended use of the scale.
Outlines safety precautions for patients and caregivers during weighing.
Provides safety and operational instructions for using the AC adapter.
Instructions and notes for operating the scale using batteries.
Provides a general overview of the scale's technology and features.
Details capacity, resolution, power, environment, and dimensions.
Explains the meaning of various symbols used in the manual and on the scale.
Describes Pelstar, LLC's ISO certifications for medical device manufacturing.
Provides instructions for properly disposing of the scale as electronic waste.
Instructions for inspecting the carton and unpacking the scale components safely.
Lists the contents found in the scale's shipping cartons.
Lists the tools necessary for assembling the scale.
Step-by-step guide for installing AA batteries into the scale.
Instructions for connecting and using the AC adapter to power the scale.
Procedure to balance the scale using the built-in bubble level and wheels.
Instructions to disable or set the automatic power-off feature for battery operation.
Explains symbols and indicators shown on the scale's display.
Describes the function of each button on the scale's keypad.
Instructions for checking scale appearance and AC adapter cord.
Procedures for cleaning and disinfecting the scale using approved solutions.
Explains the scale is factory calibrated but provides steps for recalibration if needed.
Steps to perform the zero point calibration of the scale.
Steps to perform the span (weight) calibration of the scale.
Addresses common causes and solutions for the scale not turning on.
Troubleshooting steps for issues with zeroing and questionable weight readings.
Explains common error messages like "Err", "Lo", "Err.H", "Err.L", "Err.P", "0000".
Details the two-year warranty period and what it covers.
Lists conditions and damages not covered by the warranty.
Instructions on how to get warranty service, including contact information and return process.
Information on the availability of an extended warranty program.
