Heart Interface LINK 2000 User Manual

5/31/96
32
SET UP & HISTORICAL DATA SUMMARY
The following table is a summary of the values that may be changed through set up
or by accumulating historical data. The column on the right is provided to write down your
set up values or historical data. Be sure and know these values before calling for customer
service. Multiply Voltage values by two for 24 Volt systems.
PARAMETER DEFAULT VALUE SET UP VALUE
B1 V
CHARGED
13.2 (13.5 IF F05 IS ON) ______________
B2 V
CHARGED
13.2 (13.5 IF F05 IS ON) ______________
B1 AMPS
CHARGED
2% (4% IF F05 IS ON) ______________
B2 AMPS
CHARGED
2% (4% IF F05 IS ON) ______________
B1 BAT CAPACITY 200 A hrs (800 IF F05 IS ON) ______________
B2 BAT CAPACITY 200 A hrs (800 IF F05 IS ON) ______________
AMBIENT TEMP 70
0
F ______________
BATTERY TYPE #1 LIQUID LEAD ACID ______________
POWER SHARE 30A (OFF FREEDOM 25) ______________
IDLE MODE 4W ______________
B1 USER CEF 87% (90% FOR GELLED) ______________
B2 USER CEF 87% (90% FOR GELLED) ______________
HISTORICAL DATA VALUE
B1 # OF CEF RECALC'S ______________
B2 # OF CEF RECALC'S ______________
B1 AVG DEPTH OF DISCHG ______________
B2 AVG DEPTH OF DISCHG ______________
B1 DEEPEST DISCHG ______________
B2 DEEPEST DISCHG ______________

Heart Interface LINK 2000 Specifications

General

Brand	Heart Interface
Model	LINK 2000
Category	Monitor
Language	English