Heat Controller Room Air Conditioner with R-410A Owner’s Manual
10
NORMAL SOUNDS
All the illustrations in this manual are for explanation purpose only. Your air
conditioner may be slightly different. The actual shape shall prevail.
NOTE:
AIR CONDITIONER FEATURES
Before you begin, thoroughly familiarize yourself with the control panel as shown below and all its
functions, then follow the symbol for the functions you desire. The unit can be controlled by the unit
control alone or with the remote.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
UNIT CONTROL
TO TURN UNIT ON OR OFF:
Press ON/OFF button t o t urn u nit on o r o f f .
NOTE:The unit will initiate a utomatically the Energy
Saver function under C ool, Dry, Auto (on l y
until the desired temperature is seen on the display.
This temperature will be automatically maintained
OO OO
anywhere between 62 F(17 C) and 86 F(30 C). If
you want the display to read the actual room
temperature, see To Operate on Fan Only section.
(Cooling Only Models)
(Reverse cycle Models)
REMOTE SIGNAL
RECEPTOR
Sound of Rushing Air
At the front of the unit, you may
hear the sound of rushing air
being moved by the fan
High Pitched Chatter
High efficiency compressors
may have a high pitched chatter
during the cooling cycle.
Gurgle/Hiss
Gurgling or hissing noise may
be heard due to refrigerant
passing through evaporator
during normal operation.
Pinging or Swishing
Droplets of water hitting condenser
during normal operation may cause
pinging or swishing sounds.
Vibration
Unit may vibrate and make noise
because of poor wall or window
construction or incorrect installation.
Energy
Saver
Sleep
Check
Filter
On
Timer
Off
High
Auto
On/Off
Low
Fan Speed
Mode
Dry
Auto
Cool
Fan
Temp/Timer
Temp/Timer
Follow
Me
Med
Energy
Saver
Sleep
Check
Filter
On
Timer
Off
High
Auto
On/Off
Low
Fan Speed
Mode
Dry
Auto
Cool
Fan
Temp/Timer
Temp/Timer
Follow
Me
Med
To Next Page
Loading...
