Heat-N-Glo 8000TVFL User Manual

i
i
Heat-N-Glo Fireplace
Model/Modèles:
8000TVFL, 6000TVFL, SL-36TV
Underwriters Laboratories Listed
Homologuée Underwriters Laboratories
Installers Guide
Guide dinstallation
This product is covered by one or more of the following patents: (United States) 4,112,913; 4,408,594; 4,422,426;
4,424,792; 4,520,791; 4,793,322; 4,852,548; 4,875,464; 5,000,162; 5,016,609; 5,076,254 5,191,877; 5,218,953;
5,328,356; 5,429,495; 5,452,708; 5,542,407; 5,613,487; (Australia) 543790; 586383; (Canada) 1,123,296;
1,297,746; 2,195,264; (Mexico) 97-0457; (New Zealand) 200265; or other U.S. and foreign patents pending.
WARNING: If the information in these
instructions is not followed exactly, a
fire or explosion may result causing
property damage, personal injury or
death.
Heat-N-Glo, a division of Hearth Technologies Inc.
20802 Kensington Boulevard, Lakeville, MN 55044
Printed in U.S.A. • Copyright 1999
Cheminée Heat-N-Glo
425-982EF-A 3/99
- Do not store or use gasoline or other
flammable vapors and liquids in the vi-
cinity of this or any other appliance.
- WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch.
• Do not use any phone in your
building.
• Immediately call your gas supplier
from a neighbor's phone. Follow the
gas supplier's instructions.
• If you cannot reach your gas sup-
plier, call the fire department.
- Installation and service must be
performed by a qualified installer,
service agency, or the gas supplier.
Please contact your Heat-N-Glo dealer for any ques-
tions or concerns. For the number of your nearest Heat-
N-Glo dealer, please call 612-985-6000.
– Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables dans le voisinage de cet
appareil ou de tout autre appareil.
– QUE FAIRE SI VOUS SENTEZ UNE
ODEUR DE GAZ
• Ne tentez pas d’allumer d’appareil.
• Ne touchez à aucun interrupteur. Ne
pas vous servir des téléphones se
trouvant dans le bâtiment où vous
vous trouvez.
• Évacuez la pièce, le bâtiment ou la
zone.
• Appelez immédiatement votre
fournisseur de gaz depuis un voisin.
Suivez les instructions du fournisseur.
• Si vous ne pouvez rejoindre le
fournisseur de gaz, appelez le service
des incendies.
– L’installation et l’entretien doivent être
assurés par un installateur ou un ser-
vice d’entretien qualifié ou par le
fournisseur de gaz.
AVERTISSEMENT: Assurez-vous de
bien suivre les instructions données
dans cette notice pour réduire au mini-
mum le risque d’incendie ou d’explosion
ou pour éviter tout dommage matériel,
toute blessure ou la mort.
Ce produit est protégé par un our plusieurs des brevets suivants: (États-Unis) 4,112,913; 4,408,594; 4,422,426;
4,424,792; 4,520,791; 4,793,322; 4,852,548; 4,875,464; 5,000,162; 5,016,609; 5,076,254 5,191,877; 5,218,953;
5,328,356; 5,429,495; 5,452,708; 5,542,407; 5,613,487; (Australie) 543790; 586383; (Canada) 1,123,296; 1,297,746;
2,195,264; (Mexique) 97-0457; (Nouvelle-Zélande) 200265; et autres brevets américains et étrangers en instance.
Contacter le concessionnaire Heat-N-Glo pour toute
question ou tout probl
è me. Pour obtenir le num é ro de
téléphone du concessionnaire Heat-N-Glo le plus proche,
téléphoner au 612-985-6000.
Heat-N-Glo, division de Hearth Technologies Inc.
20802 Kensington Boulevard, Lakeville, MN 55044
Imprimé aux États-Unis • Copyright 1999

Heat-N-Glo 8000TVFL Specifications

General

Brand	Heat-N-Glo
Model	8000TVFL
Category	Indoor Fireplace
Language	English

Summary

Approvals and Codes

Appliance Certification

Details of laboratory testing and listing for fireplace models.

Installation Codes

Requirements for conforming to local and national building codes.

High Altitude Installations

Adjustments for fireplace performance at higher elevations.

Getting Started

Introducing Heat-N-Glo Gas Fireplaces

Overview of B-type vent gas fireplaces and their operation.

Pre-installation Preparation

Crucial steps before installing, including checking parts and warranty.

Installing the Fireplace

Locating the Fireplace

Space and clearance requirements for fireplace placement.

Framing the Fireplace

Guidelines for building the fireplace frame and its dimensions.

Negative Pressure Make-up Air

Importance of outside air kits to prevent downdraft and gas spillage.

Installing the Vent System

Approved vent types, components, and installation parameters.

Positioning, Leveling, and Securing Fireplace

Procedures for placing, leveling, and securing the fireplace unit.

The Gas Control Systems

Explanation of Standing Pilot Ignition and Direct Spark Ignition systems.

The Gas Supply Line

Connecting the gas supply line, including shut-off valves and testing.

Gas Pressure Requirements

Specifications for natural gas and propane inlet and manifold pressures.

Wiring the Fireplace

Wiring instructions for standing pilot and direct spark ignition systems.

Finishing the Fireplace

Guidelines for fireplace finishing, clearances for mantels, and non-combustible materials.

Installing Trim, Logs, and Ember Material

Procedures for installing trim, positioning logs, and placing ember material.

Before Lighting the Fireplace

Pre-lighting checks for gas leaks, obstructions, and component integrity.

Lighting the Fireplace

Final steps and reference to user manual for lighting and operation.

Maintaining and Servicing Your Fireplace

Fireplace Maintenance Overview

General recommendations for professional servicing and maintenance.

Replacing Old Ember Material

Procedure for replacing ember material for flame appearance.

Cleaning Burner and Controls

Annual cleaning of the control compartment, logs, and burner areas.

Checking Flame Patterns and Height

Visual inspection of flame stability and burner performance.

Checking Vent System

Regular inspection of the vent cap and system for obstructions.

Cleaning the Glass Door

Recommended methods for cleaning the glass door, avoiding abrasives.