Heath Zenith SL-6107 User Manual

SL-6107
© 2003 DESA Specialty Products™ 595-4514-13
The Heath
®
/Zenith Motion Sensing 3-Way Wall
Switch automatically controls indoor lighting:
• In AUTO mode, the control automatically turns
the light on when you enter the room. The length
of time the light stays on is adjustable.
The Heath
®
/Zenith SL-6107 Motion Sensing 3-Way
Wall Switch replaces any “3-way” switch. Perfect
for rooms or hallways where two wall switches
control a single light.
This package includes:
• light control
• wire connectors
• wire jumper
• decorative cover plate
• mounting hardware
MOTION SENSING
3-WAY WALL SWITCH
AUTO
OFF ON

Heath Zenith SL-6107 Specifications

General

Type	Motion Sensor Switch
Detection Range	70 feet
Power Source	Hardwired
Voltage	120 VAC
Wattage (LED/CFL)	150W
Light Level Adjustment	Yes
Color	White
Time Delay Settings	1, 5, 10 minutes
Mounting	Wall
Wattage (Incandescent)	500 Watts

Summary

Installation Guide and Safety

Safety Precautions and Circuit Requirements

Detailed Installation Procedures

SL-6107 Wiring Diagrams

Provides diagrams for connecting the SL-6107 in 3-way circuits.

Advanced Installation Steps

Add Jumper Wire at Remote Switch

Step-by-step guide on connecting a jumper wire at the existing 3-way switch.

Connect SL-6107 to Existing Wiring

Detailed instructions for connecting the SL-6107 motion sensor switch.

Test Common Wire Connection

Mounting, Adjustments, and Troubleshooting

Troubleshooting Wiring Connections

Guides on resolving common wiring issues encountered during installation.

Control Adjustments and Cover Plate

Photo Sensitivity Adjustment

Time Control Adjustment

Operations and Troubleshooting

Using Light Control Modes

Troubleshooting: Light Functionality

Guides for resolving issues like lights not turning on or off.

Troubleshooting: Motion and Auto Mode

Addresses problems with motion detection, random activation, or daylight operation.