Heathkit HW-101 - Specifications; SSB and CW Selectivity; Power Output and Spurious Response; Transmitter Power and Impedance

RECEIVER
CW Selectivity (With Optional SBA-301-2 CW
Cileaw bmotntiael\)
EMULE GIDEGTIGUP 6 ew 8 ee tl el ll ll hl lll
Power Output
Spurious Response
Less than .3 microvolt for 10 dB signal-plus-noise to noise
ratio for SSB operation.
Somes
2.1 kHz minimum at 6 dB down, 2% kHz-minimum at 60 dB
down (3.395 MHz filter).
2 watts with less than 10% distortion.
Image and IF rejection better than 50 dB.
TRANSMITTER
DC Power !nput
RF Power Output 2 2 2 we ee ee es
Output Impedance
Oscillator Feedthrough or Mixer Products
Harmonic Radiation
rr
Transmit-Receive Operation
SSB: (A3J emission) 180 watt P.E.P. (normal voice,
continuous duty cycie).
CW: (Al emission) 170 watts (50% duty cycle).
100 watts on 80 through 15 meters; 80 watts on 10 meters
(50 2 nonreactive load).
50 2 to 75 Q with less than 2:1 SWR.
55 dB below rated output.
45 dB below rated output.
SSB: PTT or VOX.
CW: Provided by operating VOX from a keyed tone, using
grid-block keying.
157