Engine overheats
Cooling air flow is clogged.
Remove any debris from slots in shroud, blower
housing, all air passages
Incorrect spark plug. Install original spark plug.
The height of the
suction nozzle is
not adjustable
Clutch cable is loose Adjust the clutch cable
Clutch cable is damaged Replace the clutch cable
The machine does
not suck
Collection bag is full Empty the collection bag
Clogged impeller Turn off the engine and remove the obstruction
Impeller damaged Contact the authorized service agent.
CAUTION! Faults which can not be rectified with the aid of this table may be
rectified by a authorized service centre.
SERVICE AND SPARE PARTS
• Have your petrol tool serviced by a qualified repair personnel using only identical replacement
parts. This will ensure that the safety of the petrol tool is maintained.
• Whether you need technical advice, repair, or genuine factory replacement parts, contact the
WERCO authorized service nearest you. Information on service locations, visit www.werco.cz.
• When ordering spare parts, please quote the part number, this can be found at www.werco.cz
DISPOSAL
• Dispose your device, accessories and packaging in accordance with the requirements of
environmental protection into the recycling collection center.
• This machine does not belong to the household waste. Save the environment and take this
device to designated collection points where it will be received for free. For more information
please contact your local authority or nearest collection point. Improper disposal may be
punished according to national regulations.
• Petrol and oil is hazardous waste. Dispose it in right way. It does not belong to house garbage.
Regarding oil and fuel disposal contact local authorities, service center or your dealer.
GUARANTEE OF THE MACHINE
• Our warranty quality period for this device is 24 months.
• For corporate, commercial, municipal and other than private use, the warranty quality period is
reduced for 12 months, according to statutory provisions.
• All products are designed for home use, unless there is another information in the instruction
manual or operation description. When using otherwise or in contradiction with instruction
manual the claim is not recognized as legitimate.
• Inappropriate product selection and the fact that the product does not meet your requirements
can not be a reason for complaint. Buyer is familiar with the properties of the product.
• Buyer has the right to ask the seller to check the functionality of the product and become
familiar with its operation.
• A prerequisite for receiving warranty claims is that the guidelines for operating, servicing,
cleaning, storage and maintenance were followed.
• Damage caused by natural wear and tear, overloading, improper use or intervention outside the
To Next Page
Loading...
