HEDD MK2 User Manual

Q U I C K S T A R T
MK2 Professional Studio Monitors

HEDD MK2 Specifications

General

Type	Active Studio Monitor
Frequency Response	32 Hz - 50 kHz
Driver Configuration	2-way
Tweeter	HEDD Air Motion Transformer (AMT)
Inputs	XLR

Summary

HEDD MK2 Studio Monitor Quickstart Guide

Initial Setup and Connection

Powering On and Audio Connection

Connect the power cord, switch on the monitor, and connect the audio source via XLR.

Input Selection and Initial Settings

Select the input type (Analog/AES) and set controls to factory default for initial playback.

Detailed Control Explanations

Volume, Lineariser, and CoP Controls

Adjust output volume, activate phase linearity, and manage DSP settings for ported/closed modes.

Filter and Range Adjustments

Modify bass and treble response, and adjust low-frequency range for room adaptation or subwoofer use.

Input, Sensitivity, and Desk Filter

Select input, adjust sensitivity, and apply desk filter for acoustic correction.

Analog and Digital Connectivity

Connect balanced analog or digital AES sources, and utilize AES passthrough for chaining.