Need help?Do you have a question about the Hegel H190 and is the answer not in the manual?
General| Damping factor | 4000 |
|---|---|
| Amplifier class | - |
| Frequency range | 5 - 100000 Hz |
| Audio output channels | 2.0 channels |
| Peak power per channel | 500 W |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.01 % |
| RMS power output per channel (4 Ohm) | 250 W |
| RMS power output per channel (8 Ohm) | 150 W |
| XLR in | Yes |
| Headphone outputs | 1 |
| Line inputs (RCA) | 2 |
| Headphone connectivity | 6.3 mm |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Digital audio optical in | 3 |
| Speakers connectivity type | RCA |
| Purpose | Home |
| Product color | Black |
| Connectivity technology | Wired |
Weight and Dimensions| Depth | 410 mm |
|---|---|
| Width | 430 mm |
| Height | 120 mm |
| Weight | 19000 g |
Connect the H190 amplifier to your loudspeakers using speaker cables.
Connect various audio sources like CD players, streamers, or computers to the H190.
Connect the power cord and turn on the H190 amplifier using the power switch.
Details on analog inputs, line level outputs, digital inputs, and speaker outputs.
Using the H190 as a DLNA renderer to play media files from network devices.
Important safety warnings regarding product opening, power, and overheating.
To Next Page
