Need help?Do you have a question about the Hegel H360 and is the answer not in the manual?
General| Frequency Response | 5 Hz - 180 kHz |
|---|---|
| Damping Factor | Over 4000 |
| Minimum Load | 2 Ohms |
| Signal-to-Noise Ratio | More than 100 dB |
| Crosstalk | <-100 dB |
| Intermodulation | <0.01% (19kHz + 20kHz) |
| Ethernet | Yes |
| Power Output | 250W per channel into 8 Ohms |
| Analog Inputs | 2 x XLR, 3 x RCA |
| Digital Inputs | 1 x coaxial, 1 x USB, 1 x Network |
| Analog Outputs | 1 x RCA (Variable) |
| Streaming | UPnP |
| Supported Sampling Rates | Up to 192kHz |
| THD | <0.005% |
| DAC Resolution | 24 bit / 192 kHz |
Connect your speakers to the amplifier, ensuring equal distance for optimal audio.
Connect various audio sources like analog, digital, or computer via USB.
Connect the power cord to the amplifier and a power outlet.
Turn on the amplifier using the power switch located on the underside.
Details on connecting speakers and line-level outputs (fixed/variable).
Guide to connecting analog, digital, and Home Theatre inputs.
Connecting the AC power cord and IR input for remote control.
To Next Page
