Hegner Multicut-1 User Manual

Super- Universal- Fine Cut Saws
Original operating instructions
Multicut-1
Multicut-2S
Multicut-SE
Multicut-Quick
Serial no.:
Important
In order to prevent the risk of accidents, please
read the operating instructions carefully before
installation and use of the machine.
Always keep these operating instruction
near to the machine.
It is important that these instructions are
always available for reference purposes.
holzstaubgeprü
G
A
R
A
N
T
I
E
G
A
R
A
N
T
I
E
G
U
A
R
A
N
T
E
E
3
J
A
H
R
E
A
N
S
Y
E
A
R
S
*
*Except electronics (1 year)
and wearing parts

Hegner Multicut-1 Specifications

General

Brand	Hegner
Model	Multicut-1
Category	Saw
Language	English

Summary

Product Information and Safety

Important Operating Instructions

Crucial advice for preventing accidents and proper storage of the manual.

Delivery, Operation, and Safety

Operating Instructions and Proper Use

Emphasizes reading instructions and defines the machine's intended purpose and limitations.

General Safety Notes and Remaining Risks

Covers essential safety precautions and potential inherent risks, even with proper use.

Installation and Environment

Unpacking and Assembly Instructions

Step-by-step guide for unpacking the machine and assembling it onto a stable support.

Electrical Installation and Cable Routing

Commissioning and Saw Blade Management

Machine Commissioning Checklist

Essential checks before operating the machine, including assembly and blade condition.

Tensioning and Releasing Saw Blades

Detailed procedures for correctly tensioning and releasing the saw blade using levers and screws.

Machine Operation and Blade Changes

Switching the Machine On and Off

Procedures for safely switching the machine on and off for brief interruptions or longer stoppages.

Decommissioning and Blade Release

Saw Blade Replacement Procedures

Removing Saw Blade from Machine

Step-by-step guide to remove the saw blade and clamps from the machine's holders.

Handling Saw Blade Clamps

Procedures for removing saw blades from their clamps and preparing new blades.

Clamping New Saw Blade Correctly

Detailed instructions on correctly clamping a new saw blade into the saw blade clamps.

Inserting Blade and Clamp Assembly

Guide on how to re-insert the blade and clamp assembly back into the machine's swing arms.

Adjusting Machine Settings

Preparing for Stroke Length Adjustment

Procedure for Adjusting Stroke Length

Guide on releasing the connecting rod, selecting bores, and clamping it.

Troubleshooting Operating Issues

Common Operating Mistakes and Solutions

A comprehensive table detailing common problems, their causes, and recommended remedies.