To Next PageTo Next Page
Need help?Do you have a question about the Hegner Multicut-SE and is the answer not in the manual?
Specifies extraction connection parameters like volume flow and vacuum pressure for the machine.
Details measured noise emission levels at the workplace for the machine during operation.
Provides essential safety guidelines for operating the machine, including user supervision and contact.
Checks required before starting the machine, including power, dust extractor, and ventilation.
Pre-operation checks for safety, ensuring the machine is off, blade is secure, and guards are in place.
Guidelines for safe electrical connection, ensuring compliance with regulations and cable routing.
Steps and checks for putting the machine into operation after assembly.
Procedure for correctly tensioning the saw blade using the clamping mechanism.
Instructions on how to safely release the saw blade from the clamps.
Procedure for safely starting the machine, including pre-operation checks.
Steps for briefly stopping the machine during work, including vacuum cleaner.
Instruction to switch off the machine before changing the saw blade.
Reference to the procedure for releasing the saw blade.
Detailed steps for removing the saw blade from the machine's clamps.
Procedure for separating the saw blade from its retaining clamps.
Instructions for correctly inserting and clamping a new saw blade into the clamps.
Detailed instructions for adjusting the stroke length by screwing bolts into cam plate bores.
Important notes and warnings regarding repairs, especially electrical parts, and liability.
General| Type | Scroll Saw |
|---|---|
| Throat Depth | 460 mm |
| Table Size | 435 x 235 mm |
| Weight | 22 kg |
| Speed | Variable Speed |
| Stroke Rate | 400-1600 strokes per minute |
