Need help?Do you have a question about the HEIDENHAIN TNC 151 B and is the answer not in the manual?
General| Brand | HEIDENHAIN |
|---|---|
| Model | TNC 151 B |
| Category | Control Unit |
| Language | English |
Details control versions with a simple interface for connection to an external PLC.
Describes control versions with PLC-power boards for enhanced I/O.
Specifies voltage requirements, regulator recommendations, and power usage.
Details earthing resistance, surge protection, and IP rating.
Details linear transducers (LS series) and rotary encoders (ROD series).
Explains absolute position retrieval using specific reference marks.
Covers transducers and EXE-units for longer cable lengths and specific axes.
Specifies rotary encoders (ROD 426) for Vth axis spindle orientation.
Details data transmission modes (ME, FE, EXT) and peripherals.
Parameters and adjustment procedures for the linear characteristic.
Parameters and adjustment procedures for the square root characteristic.
Covers parameter alteration and offset adjustment procedures.
Fine adjustment procedures for trailing error in linear ramp.
Details adjustment for square root characteristic parameters.
Illustrates a customized macro with a program example.
Covers machine parameters for Vth axis spindle orientation.
To Next Page