HEIDENHAIN TNC 155 F User Manual

Describes linear transducers for TNC 151 B/155 B and TNC 151 Q/155 Q.

Explains transducers with distance-coded reference marks for absolute position retrieval.

Details transducers and EXE-units for TNC 151.R/155.R control versions.

Information on rotary encoders for spindle orientation (axis V) with 4-fold evaluation.

Describes the function of external Start, Stop, and Rapid Traverse buttons.

Covers M-, S-, T-functions, strobe signals, and the auxiliary function feedback.

Details the function and supervision of the emergency stop circuit.

Describes inputs for reference end position and reference pulse inhibit.

Covers programming of software limit switch ranges for permissible travel.

Describes external direction buttons and feed rate potentiometer functionality.

Covers inputs for HEIDENHAIN 3D-touch probe systems.

Parameters for programming rapid feeds, spindle speeds, and axis designation.

Parameters for optimizing trailing error and positioning behavior.

Describes user-accessible machine parameters via the MOD-function.

Parameters set by machine design or freely determined.

Parameter for selecting controlled, display, or inactive axes.

Parameters related to rapid traverse and manual feed rates.

Parameters for machining variable contour pockets.

Parameters for controlling reference mark approach velocity and sequence.

Parameters for outputting spindle speeds coded or as S-Analogue voltage.

Parameters controlling the output of tool numbers and store numbers.

Parameters covering resolution, signal evaluation, and standstill supervision.

Parameters needing optimization during commissioning.

Common machine parameters for linear and square root ramp characteristics.

Details machine parameter 60 for the linear ramp characteristic.

Details machine parameter 60 for the square root ramp characteristic.

Explains error messages related to positioning errors.

Lists parameters that can be altered if the PLC program is amended.

Parameters for the RS-232-C (V.24) data interface.

Details the RS-232-C standard data interface configuration in EXT-mode.

Explains the block-by-block data transfer mode.

Parameters for handwheels and touch probe systems configuration.

Parameters specific to 3D-touch probe systems.

Provides a checklist for machine commissioning procedures.

Lists checks to be performed before switching on the machine.

A checklist for control adjustment procedures.

Details how to assign transducer inputs to control-internal axes.

Diagrams for input/output of machine parameters.

Detailed connection and PLC allocation for TNC 151/155 B/BR series.

Terminals and PLC allocation for the first PLC board of Q/QR versions.

Terminals and PLC allocation for the second PLC board of Q/QR versions.

PLC board connections and allocation for standard PLC programs.