HEIDENHAIN Programming Station TNC 320/TNC 620/TNC 640 7
1.1 Introduction ..... 10
General information ..... 10
Options/Feature content level (FCL) ..... 10
1.2 Compatibility ..... 11
Downward compatibility ..... 12
Differences in fixed cycles ..... 13
Differences in touch probe cycles ..... 19
Differences in miscellaneous functions M ..... 27
Differences in Q-parameter programming ..... 31
Differences in other functions ..... 33
1.3 Working with the programming station ..... 36
Starting the programming station ..... 36
Showing the virtual keyboard ..... 37
Exiting the programming station ..... 37
1.4 Data transfer from the programming station to the machine tool ..... 39
Prerequisites ..... 39
Preparations at the programming station ..... 39
Calling a program from the machine tool ..... 40
Connection between the programming station and HEIDENHAIN PC software ..... 40
1.5 Special features of the demo version ..... 41
General information ..... 41
Starting the demo version ..... 41
Keyboard assignment ..... 42
Overview of keyboard assignment ..... 46
Key assignment on portable computers ..... 47
1 Important information on the software for the programming station ..... 9
To Next Page
Loading...
