Fundamentals | Control model, software and features
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
17
New functions 34059x-05
The column PITCH has been added to the tool management,
see "Entering tool data into the table", page 242
The columns YL and DYL have been added to the turning tool
table, see "Tool data", page 688
In the tool management, several lines can now be added at the
end of the table, see "Editing tool management", page 272
Any turning tool table can be selected for the program test, see
"Test run", page 818
Programs with .HU and .HC extensions can be selected and
processed in all operating modes
The functions SELECT PROGRAM and
CALL SELECTED PROGRAM have been introduced, see "Calling
any program as a subprogram", page 363
New FEED DWELL function for programming repeating dwell
times, see "Dwell time FUNCTION FEED", page 578
The FN18 functions have been expanded, see "FN 18: SYSREAD
– Reading system data", page 402
The DCM function can be activated and deactivated from
the NC program, see "Activating and deactivating collision
monitoring", page 512
USB data carriers can be locked with the SELinux security
software, see "SELinux security software", page 116
The machine parameter posAfterContPocket (no. 201007) that
influences positioning after an SL cycle has been introduced,
see "Machine-specific user parameters", page 882
Protective zones can be defined in the MOD menu, see
"Entering traverse limits", page 850
Write protection is possible for individual lines in the preset
management, see "Saving presets in the table", page 739
New manual probing function for aligning a plane, see
"Measuring 3-D basic rotation", page 769
New function for aligning the machining plane without rotary
axes, see "Tilting the working plane without rotary axes",
page 614
CAD files can be opened without option number 42, see "Data
Transfer from CAD Files", page 333
New software option 96 Advanced Spindle Interpolation, see
"Software options", page 9
New software option 131 Spindle Synchronism, see "Software
options", page 9
To Next Page
Loading...
