HEIDENHAIN TNC 640 - Page 926

Tables and Overviews | Functions of the TNC 640 and the iTNC 530 compared
21
926
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
Cycle TNC 640 iTNC 530
291 COUPLG.TURNG.INTERP.
X, option 96 –
292 CONTOUR.TURNG.INTRP.
X, option 96 –
800 ADJUST XZ SYSTEM
X, option 50 –
801 RESET ROTARY COORDINATE SYSTEM
X, option 50 –
810 TURN CONTOUR LONG.
X, option 50 –
811 SHOULDER, LONGITDNL.
X, option 50 –
812 SHOULDER, LONG. EXT.
X, option 50 –
813 TURN PLUNGE CONTOUR LONGITUDINAL
X, option 50 –
814 TURN PLUNGE LONGITUDINAL EXT.
X, option 50 –
815 CONTOUR-PAR. TURNING
X, option 50 –
820 TURN CONTOUR TRANSV.
X, option 50 –
821 SHOULDER, FACE
X, option 50 –
822 SHOULDER, FACE. EXT.
X, option 50 –
823 TURN TRANSVERSE PLUNGE
X, option 50 –
824 TURN PLUNGE TRANSVERSE EXT.
X, option 50 –
830 THREAD CONTOUR-PARALLEL
X, option 50 –
831 THREAD LONGITUDINAL
X, option 50 –
832 THREAD EXTENDED
X, option 50 –
840 RECESS TURNG, RADIAL
X, option 50 –
841 SIMPLE REC. TURNG., RADIAL DIR.
X, option 50 –
842 ENH.REC.TURNNG, RAD.
X, option 50 –
850 RECESS TURNG, AXIAL
X, option 50 –
851 SIMPLE REC TURNG, AX
X, option 50 –
852 ENH.REC.TURNING, AX.
X, option 50 –
860 CONT. RECESS, RADIAL
X, option 50 –
861 SIMPLE RECESS, RADL.
X, option 50 –
862 EXPND. RECESS, RADL.
X, option 50 –
870 CONT. RECESS, AXIAL
X, option 50 –
871 SIMPLE RECESS, AXIAL
X, option 50 –
872 EXPND. RECESS, AXIAL
X, option 50 –
880 GEAR HOBBING
X, option 50,
option 131
–
892 CHECK IMBALANCE
X, option 50 –