Features of protector
1. The protective device will work at following cases.
- Restarting the unit at once after operation stops or changing mode during operation,
you need to wait for 3 minutes.
- Connect to power supply and turn on the unit at once, it may strat 20 seconds later.
2. If all operation has stopped, press ON/OFF button again to restart, timer should be
set again if it has been canceled.
Features of HEATING mode
PREHEAT
At the neginning of the HEATING operation, the airflow from the indoor unit is
discharged 2-5 minutes later.
DEFROST
In HEATING operation the appliance will deforst (de-ice) automatically to raise efficiency.
This procedure usually lasts 2-10 minutes. During defrosting, fans stop operation. After
defrosting completes, it return to HEATING mode automatically.
Note: Heating is NOT available for cooling only air conditioner models.
To Next Page
Loading...
Need help?
General
