6. VERTICAL AIRFLOW CONTROL (WITH THE REMOTE CONTROLLER)
Using remote controller to set various angles of flow or specific angle as you like.
Press button once.
Result: the vertical adjustment louver will swing up and down automatically.
Press button again.
Result: the louvers swing to a suitable angle as desired.
7. HORIZONTAL AIRFLOW CONTROL (WITH THE REMOTE CONTROLLER)
Using remote controller to set various angles of flow or specific angle as you like.
Press button once.
Result: the horizontal adjustment louver will swing left and right automatically.
Press button again.
Result: the louver swing to a suitable angle as desired.
Note: if the unit doesn’t have four ways airflow function, you can adjust horizontal
airflow by yourself.
A. Do not turn the vertical adjustment louvers manually, otherwise malfunction may
occur. If that happens, turn off the unit first and cut off the power supply, then
restore power supply again.
B. It is better not to let the vertical adjustment louver tilt downward for a long time
at COOLING or DRY mode to prevent condensed water from dripping.
8. HOW TO SET SMART MODE
Press the SMART button.
Result: Enters SMART mode (fuzzy logic operation) directly regardless of the unit is on
or off. Temperature and fan speed are automatically set based on the actual room
temperature.
To Next Page
Loading...
Need help?
General
