EasyManua.ls Logo

Heinner HAC-HS09WH++ - Heat Pump Models; Cooling Only Models

Heinner HAC-HS09WH++
56 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.heinner.com
22
HEAT PUMP MODELS
Indoor temperature
Operation mode
Target temperature
21 (70°F) or below
HEATING
22 (72°F)
21 -23 (70°F-73°F)
FAN ONLY
23 -26 (73°F-79°F)
DRY
Room temperature decrease 2
(2°F) after operate for 3
minutes
Over 26 (79°F)
COOLING
26 (79°F)
COOLING ONLY MODELS
Indoor temperature
Operation mode
Target temperature
23 (73°F) or below
FAN ONLY
23 -26 (73°F-79°F)
DRY
Room temperature decrease 2
(2°F) after operate for 3
minutes
Over 26 (79°F)
COOLING
26 (79°F)
SMART button is ineffective in SUPER mode.
ECONOMY button is ineffective in SMART mode.
Press MODE button cancel SMART mode.
Note: Temperature, airflow and direction are controlled automatically in SMART mode.
However, for the inverter you can choose from -7 to 7, if you still feel uncomfortable.
What can be done in SMART mode?
Your feeling
Button
Adjust
Uncomfortable because
of unsuitable air flow
volume
Indoor fan speed alternates among Auto,
Higher, High, Medium, low and Lower each
time when this button is pressed.
Uncomfortable because
of unsuitable flow
direction
Press it once, the vertical adjustment louver
(horizontal adjustment louver) swings to
change vertical airflow direction (horizontal
airflow direction). Press it again, the swing
stops.
How to cancel the SMART mode?
Press the MODE button.
Result: the SMART mode will be cancelled.

Other manuals for Heinner HAC-HS09WH++

Related product manuals