17. SLEEP MODE
SLEEP mode can be set in COOLING, HEATING or DRYING mode.
This function gives you a more comfortable environment for sleep.
The appliance will stop operation automatically after operating for 8 hours. Fan speed is
automatically set at low speed.
How to set SLEEP MODE?
Each time “SLEEP” button is pressed.
Result: The operation mode is changed in sequence:
SLEEP mode 1:
• Set temperature will rise by 2°C if the appliance operates in cooling mode for
2 hours constantly, then keeps steady.
• Set temperature will decrease by 2°C at most if the appliance operates in
heating mode for 2 hours constantly, then keeps steady.
SLEEP mode 2:
• Set temperature will rise by 2°C if the appliance operates in cooling mode for
2 hours constantly, decrease by 1°C after 6 hours, and then decrease by 1°C
after 7 hours.
• Set temperature will decrease by 2°C if the appliance operates in heating
mode for 2 hours constantly, rise by 1°C after 6 hours, and then rise by 1°C
after 7 hours.
SLEEP mode 3:
• Set temperature will rise by 1°C if the appliance operates in cooling mode for
1 hour, rise by 2°C after 2 hours, then decrease by 2°C after 6 hours,
decrease by 1°C after 7 hours.
• Set temperature will decrease by 2°C if the appliance operates in heating
mode for 1 hour, decrease by 2°C after 2 hours, then rise by 2°C after 6
hours, rise by 2°C after 7 hours.
SLEEP mode 4:
Set temperature will keep steady.
Note: Press SUPER, SMART, MODE or FAN button and the SLEEP mode will be
cancelled. By pressing “Sleeping mode” four times or selecting other modes like
SUPER, SMART or FAN you can cancel sleeping function of those units without
four sleeping curves. Heating is not available for cooling only air conditioner.
To Next Page
Loading...
Need help?
General
