3. Auxiliary functions
Options:
Drying Level - The humidity level obtained after drying can be increased by 3 levels. This way,
level of required dryness can be selected. The levels that can be selected other than the
standard setting: 1, 2, 3. After selection, the LED of the relevant drying level will turn on.
Anti-crease - If you select the "Anti-Crease" option and do not open the door of the dryer at
the end of the programme, the 1-hour anti-crease phase will extend to 2 hours. After
selecting the Anti Crease option, you will hear an audible warning. You can press the same
button again to cancel the option. If you open the door or press the Start/Pause key while
the anti-crease step is in progress, the said step will be cancelled.
Delayed start - You can delay the start time of the programme by selecting the 1-hour to
23-hour option. You can activate the desired delay time by pressing the Start/Pause button.
When the time is up, the selected programme will start automatically. During the delay time,
options compatible with the programme can be activated/deactivated. Long pressing on
Delayed Start button changes delay time continuously.
Delicate - Delicate fabrics are dried for a longer time at a low temperature.
Buzzer Cancel - The dryer gives an audible warning when program selection knob is turned,
buttons are pressed and at the end of programme. To cancel the warnings, press and hold
the "Anti-Crease Option" button for 3 seconds. When you press the button, you will hear an
audible warning that the option has been cancelled.
Child lock - There is a child lock option to avoid changes in the programme flow when keys
are pressed during the programme. To activate child lock feature user should press "Delay
Start" and "Anticrease" buttons simultaneously for 3 sec. When the child lock activated, all
keys will be deactivated. Child lock is not automatically deactivated at the end of the
program. To deactivate the child lock at end of the programme, set the programme
selection knob to ‘‘Off’’ position. Then set programme selection knob to first position. Child
lock is still active. To deactivate child lock , user should press "Delay Start" and "Anticrease"
buttons simultaneously for 3 sec. When activating/deactivating the child lock, '‘CL’’ will
visualize on display for 2 sec and then becomes off; and an audible warning will be heard.
Warning; when the product is running or the child lock is active, if you turn the programme
selection knob, you will hear an audible warning and ‘‘CL’’ will visualize on display for 2 sec
and then becomes off. If you turn the programme selection knob, you will hear an audible
warning. Even if you set the programme knob to another programme, the previous
programme will continue running. To select a new programme, you need to deactivate the
child lock and then set the programme selection knob.
To Next Page
Loading...
