www.heinner.com 8kg, 220-240V~50Hz
12
Your dryer is fitted with systems that continuously perform checks during the drying process
to take the necessary measures and warn you in case of any malfunction.
WARNING: If the problem persists even if you have applied the steps in this section, please
contact the your dealer or an Authorised Service Provider. Never try to repair a
nonfunctional product.
The drying process takes a long time.
The surface of the lint filter might
be clogged.
Wash the filter with lukewarm water.
The condenser might be clogged.
The ventilation grills in front of the
machine might be closed.
Open the door/windows to prevent the room
temperature from rising too much.
There might be a layer of limescale
on the humidity sensor
Clean the humidity sensor.
The dryer might be poverloaded
with laundry.
Do not overload the dryer.
The laundry might be insufficiently
spun.
Select a higher spin speed on your washing
machine.
Laundry comes out damp at the end
of the drying process.
The laundry that comes out hot at the end of the drying process generally feels
more humid.
The programme used might not be
suitable for the type of laundry.
Check the care labels on the laundry items,
select a suitable programme for the type of
laundry and additionally, use the time
programmes.
The surface of the lint filter might
be clogged.
Wash the filter with lukewarm water
The condenser might be clogged.
The dryer might be overloaded
with laundry.
Do not overload the dryer.
The laundry might be insufficiently
spun.
Select a higher spin speed on your washing
machine.
To Next Page
Loading...
