PROGRAMME PROGRESS
During the Programme
If you open the door when the programme is running, the product will switch to standby
mode. Once the door has been closed, press the Start/Pause key to resume the programme.
Do not open the loading door when the programme is running. If you have to open the door,
do not keep it open for a long time.
Programme End
Once the programme is over, the warning LEDs for Start/Pause, water tank level, filter
cleaning and condenser cleaning will turn on. Additionally, an audible warning will be given
at the end of the programme. You can remove the laundry to make the machine ready for a
new load.
IMPORTANT: Clean the lint filter after every programme. Empty the water tank after every
programme.
IMPORTANT: If you do not take out the laundry after the programme has ended, the 1-hour
Anti Crease phase will automatically be activated. This programme rotates the drum at
regular intervals to prevent creases.
To Next Page
Loading...
Need help?
General
