www.heinner.com 8Kg, 220-240V~50Hz
21
Your dryer is fitted with systems that continuously perform checks during the drying process
to take the necessary measures and warn you in case of any malfunction.
WARNING: If the problem persists even if you have applied the steps in this section, please
contact the your dealer or an Authorised Service Provider. Never try to repair a nonfunctional
product.
The drying process takes a
long time.
The surface of the lint filter
might be clogged.
Wash the filter with lukewarm water.
The condenser might be
clogged.
The ventilation grills in
front of the machine might
be closed.
Open the door/windows to prevent
the room temperature from rising too
much.
There might be a layer of
limescale on the humidity
sensor
Clean the humidity sensor.
The dryer might be
poverloaded with laundry.
Do not overload the dryer.
The laundry might be
insufficiently spun.
Select a higher spin speed on your
washing machine.
Laundry comes out damp at
the end of the drying process.
The laundry that comes out hot at the end of the drying process
generally feels more humid.
The programme used might
not be suitable for the type
of laundry.
Check the care labels on the laundry
items, select a suitable programme for
the type of laundry and additionally,
use the time programmes.
The surface of the lint filter
might be clogged.
Wash the filter with lukewarm water
The condenser might be
clogged.
The dryer might be
overloaded with laundry.
Do not overload the dryer.
The laundry might be
insufficiently spun.
Select a higher spin speed on your
washing machine.
To Next Page
Loading...
Need help?
General
