www.heinner.com 8Kg, 220-240V~50Hz
22
The dryer cannot be opened
or the programme cannot be
started. The dryer does not
get activated when adjusted.
The dryer might not be plugged
in.
Make sure that the plug is fitted in the
socket.
The loading door might be
open.
Make sure that the loading door is
properly closed.
You might not have set a
programme or pressed the
Start/Pause key.
Make sure that the programme has
been set and the dryer is not in the
Standby (Pause) mode.
Child lock might be active.
Deactivate the child lock.
The programme has been
interrupted for no reason
The loading door might not be
closed properly.
Make sure that the loading door is
properly closed.
There might have been a power
failure.
Press the Start/Pause key to start the
programme.
The water tank might be full.
Clothes have shrunk, felted or
deteriorated.
The programme used might not
be suitable for the type of
laundry.
Check the care labels on the laundry
items, select a suitable programme for
the type of laundry.
Water leaking from
the loading door.
There might be lint
accumulated on the inner
surfaces of the loading door
and on the surfaces of the
gasket of the loading door.
Clean the inner surfaces of the loading
door and the surfaces of the gasket of
the loading door.
The loading door opens on its
own.
The loading door might not be
closed properly.
Push the loading door until you hear
the closing sound
The water tank warning
symbol is on/flashing.
The water tank might be full.
The water discharge hose might
be bent.
If the product is connected directly to
the water outlet, check the water
discharge hose
The filter cleaning warning
symbol is on.
The lint filter might be unclean.
The filter cleaning warning
symbol is flashing.
The filter seat might be clogged
by lint.
There might be a layer that
causes obstruction on the
surface of the lint filter.
Wash the filter with lukewarm water.
The condenser might be
clogged.
To Next Page
Loading...
Need help?
General
