Electrical connection
ATTENTION: There is risk of fire and electric shock.
1. Your dryer is set to 220-240 V and 50 Hz.
2. The mains cable of the dryer is equipped with a special plug. This plug must be connected
to an earthed socket protected by a fuse of 16 Amperes as indicated on the type plate.
The fuse current rating of the power line where the outlet is connected must also be 16
amperes. Consult a qualified electrician if you do not have such an outlet or fuse.
3. Our company cannot be held responsible for damages resulting from usage without
earthing.
IMPORTANT: Operating your machine at low voltage values will shorten the service life and
decrease the performance of your machine.
Under counter installation
1. Leave at least 3 cm of space between the side and rear walls of the product and the
underside of the worktop when installing your product under a counter.
2. Assembly / disassembly under the counter if neccessary must be done by authorized
service.
To Next Page
Loading...
