NOTE: If you decide not to start the selected programme, please see the "Changing a
Programme" and "Cancelling a Programme" sections.
NOTE: When there is insufficient softening salt, the Salt Lack Warning Indicator (ii) will
illuminate to indicate the salt chamber needs filling.
NOTE: When there is insufficient rinse aid, the Rinse Aid Lack Warning Indicator (iii) will
illuminate to indicate the rinse aid chamber needs filling.
Changing a Programme
Follow the steps below if you would like to change the programme while in operation
NOTE: Open the door slightly at first to avoid water spillage if you wish to stop the wash
programme before it is complete
Cancelling a Programme
Follow the steps below if you would like to cancel a programme while in operation.
To Next Page
Loading...
