Why does my Heinner Dishwasher programme not start?
If your Heinner Dishwasher programme doesn't start, there might be several reasons. First, ensure the dishwasher is properly plugged in and switched on using the On/Off button. Check your indoor fuses and make sure the water inlet tap is open. Also, verify that the dishwasher door is fully closed. Lastly, inspect the water inlet hose and machine filters for any clogs.
Why does Heinner HDW-FS4552WE++ leave food on dishes?
If partial food wastes remain on the dishes after washing in your Heinner Dishwasher, it might be due to several reasons. Avoid overloading the baskets to ensure proper water spray coverage. Ensure dishes aren't leaning against each other and are placed correctly. Verify that you're using enough detergent and selecting the appropriate wash programme. Also, check the spray arms for any clogs and clean them if necessary.
Why does my Heinner Dishwasher leave white stains on dishes?
If your Heinner Dishwasher leaves whitish stains on dishes, it could be due to insufficient detergent. Try using the correct amount of detergent as instructed in the programme table. Also, the rinse aid dosage and/or water softener setting might be too low, so increase those levels. If the water hardness level is high, increase the water softener level and add salt. Finally, ensure the salt compartment cap is properly closed.
How to improve drying in Heinner Dishwasher?
If your Heinner Dishwasher isn't drying dishes properly, ensure you've selected a programme with a drying option. Also, the rinse aid dosage might be set too low, so try increasing the rinse aid dosage setting.
What to do if water remains inside Heinner HDW-FS4552WE++?
If water remains inside the machine of your Heinner Dishwasher, check the drain hose for clogs or twists and clean or untwist it. Also, ensure the filters are clean. If the programme is still running, wait until it finishes.
Why does Heinner Dishwasher cause rust stains on dishes?
If you notice rust stains on the dishes after washing in your Heinner Dishwasher, it may be due to the stainless-steel quality of your dishes. Use only dishwasher-proof sets. High salt levels in the wash water can also cause this, so adjust the water hardness level. Ensure the salt compartment cap is closed properly, and use a funnel when filling salt to avoid spillage. If the issue persists, a poor mains grounding might be the cause, and you should consult a qualified electrician immediately.
Why does Heinner Dishwasher stop mid cycle?
If your Heinner Dishwasher stops during washing, it could be due to a power failure. Check your mains power supply. It could also be due to a water inlet failure, so check the water tap.
How to fix shaking noises during Heinner HDW-FS4552WE++ wash?
If you hear shaking and hitting noises during a wash operation with your Heinner Dishwasher, the spray arm might be hitting dishes in the lower basket. Try moving or removing any items that are blocking the spray arm.
Why does detergent remain in Heinner HDW-FS4552WE++ Dishwasher compartment?
If detergent remains in the detergent compartment of your Heinner Dishwasher, ensure that the detergent compartment is dry before adding detergent.
General| Type | Freestanding |
|---|---|
| Energy Efficiency Class | E |
| Noise Level | 52 dB |
| Number of Programs | 7 |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Control Type | Electronic |
| Display | LED |
| Cutlery Basket | Yes |
| Half Load | Yes |
General information about the instruction manual's purpose and scope.
Lists the items included in the dishwasher package.
Critical safety precautions for appliance usage and packaging.
Essential guidelines for safe and correct dishwasher installation.
Rules and warnings for safe operation during use.
Information on recycling packaging and environmentally friendly materials.
Identifies and labels the various parts of the dishwasher with a diagram.
Provides detailed technical data such as dimensions, power, and water pressure.
Guidelines for selecting a suitable location and placing the dishwasher.
Instructions and warnings for connecting the water inlet hose.
How to connect the water drain hose to the drain outlet.
Warnings and instructions for safely connecting the dishwasher to the power supply.
Steps and considerations for installing the dishwasher under a countertop.
Steps to prepare the dishwasher before its initial operation.
Explains the role of water softener and salt in achieving good washing results.
Instructions on how to fill the salt compartment with dishwasher salt.
Information on how to test water hardness and interpret results.
Explains the water softener and how to set the hardness level.
Guidelines on selecting and using the correct amount of detergent.
Instructions for filling the detergent dispenser.
Advice on using combined detergent products.
Explains rinse aid function and how to fill and adjust dosage.
Recommendations for efficient and effective loading of dishes.
General tips for loading, including pre-rinsing and avoiding obstructions.
Specific instructions for loading the upper basket, including rack adjustments.
Visual examples of how to load the lower basket correctly.
Visual examples of how to load the top basket correctly.
Illustrates incorrect loading patterns and their negative impact.
Lists items that should not be washed in the dishwasher.
Explains the program table, including duration, energy, and water consumption.
Identifies and explains the function of each button and indicator on the control panel.
Instructions on how to change the wash program while the machine is running.
Steps to cancel an ongoing wash program.
Guide on how to clean the interior of the dishwasher and its filters.
Instructions for cleaning the spray arms to ensure proper water distribution.
Information on cleaning the drain pump and potential risks.
Problems with program start, water drainage, and stopping during washing.
Addresses unusual noises and incomplete cleaning of dishes.
Explains causes and fixes for white/rust stains and poor drying performance.
Solutions for detergent not dispensing correctly.
Actions for water inlet, pressure, and continuous inlet system failures.
Solutions for inability to discharge water and overflow issues.
Troubleshooting for faulty heater, sensor, electronic card, or overheating.
What to do for high voltage, low voltage, and other system failures.
Information about technical data, EPREL database, and obtaining support.
Guidance on environmentally responsible disposal of the appliance.
To Next Page
