An Aquastop water spout is available. Do not damage it or allow it to become kinked or
twisted.
Drain hose
Connect the water drain hose directly to water drain hole or to the sink outlet spigot. This
connection should be minimum 50 cm and maximum 110 cm from flor plane.
IMPORTANT: Items will not wash properly if a drain hose longer than 4 m is used.
Electrical connection
WARNING: Your machine is set to operate at 220-240 V. If the mains voltage supply to your
machine is 110 V, connect a transformer of 110/220 V and 3000 W between the electrical
connection.
• The earthed plug of the machine must be connected to an earthed outlet supplied by
suitable voltage and current.
• In the absence of earthing installation, an authorised electrician should carry out an
earthing installation. In the case of use without earthing installed, we will not be
responsible for any loss of use that may occur.
• The indoor fuse current value should be 10-16 A.
• Connect the product to a grounded outlet protected by a fuse.
Fitting the machine undercounter
If you wish to fit your machine undercounter, there must be sufficient space to do so and the
wiring-plumbing must be suitable to do so (1). If the space under the countertop is suitable for
fitting your machine, remove the worktop as shown in the illustration (2).
WARNING: The countertop, of which the machine will be placed under, must be stable in order
to prevent imbalance.
The top panel of the dishwasher must be removed to fit the machine under the countertop.
To Next Page
Loading...
Need help?
General
