The programme does not start.
Your Dishwasher is not plugged in.
Your Dishwasher is not switched on.
Switch your Dishwasher on by pressing the
On/Off button.
Water inlet tap is closed.
Turn on the water inlet tap.
Your Dishwasher door is open.
Close the Dishwasher door.
Water inlet hose and machine filters
are clogged.
Check the water inlet hose and machine
filters and make sure they are not clogged.
Water remains inside the
machine.
Water drain hose is clogged or
twisted.
Check the drain hose, then either clean or
untwist it.
The programme is not finished yet.
Wait until the programme is finished.
Machine stops during washing.
Shaking and hitting noises are
heard during a wash
operation.
The spray arm is hitting the dishes in
the lower basket.
Move or remove items blocking the spray
arm.
Partial food wastes remain on
the dishes.
Dishes placed incorrectly, sprayed
water not reaching affected dishes.
Dishes leaning each another.
Place dishes as instructed in the section on
loading your dishwasher.
Not enough detergent used.
Use the correct amount of detergent, as
instructed in the programme table.
Wrong wash programme selected.
Use the information in the programme
table to select the most appropriate
programme.
Spray arms clogged with food waste.
Clean the holes in the spray arms with thin
objects.
To Next Page
Loading...
Need help?
General
