How to fix Heinner HDW-FS4506DSE++ Dishwasher when the programme won’t start?
If the Heinner Dishwasher programme won’t start, check the following: * Ensure the plug is connected. * Check your indoor fuses. * Make sure the water inlet tap is turned on. * Ensure the machine door is closed. * Verify the machine is switched on by pressing the Power On/Off button. * Confirm that the water inlet filter and the machine filters are not clogged.
What to do if my Heinner Dishwasher has an inadequate water supply?
If the Heinner Dishwasher has an inadequate water supply: * Make sure the water input tap is fully open and that there is no water cut. * Close the water input tap, separate the water input hose from the tap, and clean the filter at the connection end of the hose. * Restart your machine; if the error continues, contact the service.
What to do if the alarm is active against water overflow in Heinner HDW-FS4506DSE++?
If the alarm is active against water overflow in your Heinner Dishwasher, power off your machine, close the tap, and contact service.
What to do if my Heinner Dishwasher shows an error of continuous water input?
If your Heinner Dishwasher is experiencing an error of continuous water input, close the tap and contact service.
What to do if the waste water in Heinner HDW-FS4506DSE++ Dishwasher cannot be discharged?
If the waste water in the Heinner Dishwasher cannot be discharged, power off-on your machine and activate the program cancellation command. If the error continues, contact the service. The water discharge hose or the filters of your machine might be clogged.
Why does my Heinner HDW-FS4506DSE++ stop during a wash operation?
If the Heinner Dishwasher stops during a wash operation, it may be due to a power failure, water inlet failure, or the program being on standby mode. Program can be on standby mode.
Why is water left inside the Heinner HDW-FS4506DSE++ Dishwasher at the end of the programme?
If water is left inside the Heinner Dishwasher at the end of the programme, it could be because the water drain hose or the filters are clogged, or the programme is not finished yet.
Why are detergent residues left in the detergent compartment of my Heinner HDW-FS4506DSE++?
If you find detergent residues left in the detergent compartment of your Heinner Dishwasher, it might be because detergent was added when the compartment was wet.
Why is my Heinner Dishwasher making shaking and hitting noises during a wash operation?
If you hear shaking and hitting noises during a wash operation of your Heinner Dishwasher, it's likely that the dishes are placed incorrectly or the spray arm is hitting the dishes.
Why are there partial food wastes left on the dishes after using my Heinner Dishwasher?
If you notice partial food wastes left on the dishes in your Heinner Dishwasher, it could be due to several reasons: * Dishes placed incorrectly, preventing sprayed water from reaching all areas. * Basket overly loaded. * Dishes leaning against one another. * Very small amount of detergent added. * An unsuitable, rather weak wash programme selected. * Spray arm clogged with food wastes. * Filters clogged or incorrectly fitted. * Water drain pump clogged.
General| Brand | Heinner |
|---|---|
| Model | HDW-FS4506DSE++ |
| Category | Dishwasher |
| Language | English |
Provides an overview of the manual's content and the importance of reading it before use.
Lists the items included in the dishwasher package: the appliance, user manual, and warranty card.
Check for damage upon delivery and follow packaging disposal rules.
Ensure proper placement, qualified installation, original parts, electrical safety, and initial unloaded run.
Use for household purposes, safety around open door, correct detergent use, water is not drinking, no solvents, heat-resistant plastics, child safety, suitable items, hot water warning, door closing.
Keep packaging away, prevent children from operating, keep away from detergents, keep away from open machine, secure old machines.
Repairs by qualified personnel only, disconnect power before repair, turn off water tap.
Tips for energy saving, proper loading, pre-wash use, and dish placement.
Lists items like cigarette ashes, wood-handled cutlery, non-heat-resistant plastic, aluminium, silver, delicate glass, sponges.
Details on recyclable packaging materials and disposal.
Identifies and labels key components of the dishwasher, including baskets, spray arms, and control panel.
Lists capacity, dimensions, weight, power input, water pressure, and current.
Guidelines for selecting a suitable location, clearance, leveling, and door operation.
Instructions for plumbing suitability, filter recommendation, water temperature, inlet hose use, and pressure requirements.
Details on connecting the drain hose to the drain hole or sink spigot and height requirements.
Guidance on earthed outlet connection, voltage, fuse rating, and safety precautions when plugging/unplugging.
Instructions for fitting the dishwasher under a countertop, including worktop removal and machine placement.
Steps include checking specifications, removing packaging, setting water softener, adding salt, and filling rinse aid.
Explains why soft water is crucial for washing performance and how the softener system works.
Detailed instructions on using specific dishwasher salt, filling the compartment, and initial use.
Explains how to test water hardness using a strip and how to interpret results.
Table correlating test strip results with machine settings for different water hardness levels.
Table linking water hardness levels to recommended salt consumption settings.
Explains the system's function, how to adjust hardness levels, and the factory setting.
Advice on choosing detergents, storage, correct dosage, and avoiding damage.
Step-by-step instructions on opening the compartment, measuring detergent, and using pre-wash.
Information on 2-in-1, 3-in-1 detergents, points to consider, and recommended usage.
Advice on adjusting settings and using powder detergents for short programs with combined detergents.
Explains the purpose of rinse aid for drying and streak-free results, and how dosage affects outcomes.
Instructions on how to fill the rinse aid compartment and adjust its dosage.
Step-by-step guide to adjust the rinse aid level using the control panel buttons.
Explains how to use the dish racks on the upper basket for cups, glasses, and cutlery.
Instructions on how to adjust the height of the top basket for different dish sizes.
Visual examples of correct loading for lower and upper baskets.
Visual examples and warning about improper loading affecting performance.
Details of various wash programs, their type of soil, detergent amount, duration, and consumption.
Identifies and explains the function of each button and indicator light on the control panel.
Explains the half load and tablet functions activated by the option button.
Instructions on how to set, change, and cancel the delay start timer.
How to use the hygiene function for a more hygienic wash.
How to activate extra rinsing for cleaner and shinier dishes.
How to activate extra drying to improve dish dryness.
Instructions on how to activate and deactivate the child lock feature.
Steps to change the wash program while the machine is running.
Instructions on how to cancel an ongoing wash program and drain the machine.
How to clean door seals with a damp cloth.
Advice on cleaning filters, spray arms, and using soft materials.
Detailed instructions on removing, cleaning, and refitting the micro, coarse, and metal/plastic filters.
How to clean clogged spray arms by removing and rinsing them.
Steps to take if the drain pump is blocked by food residues, including safety warnings.
A table listing error codes and the corresponding control actions or service contact.
Addresses issues like lights on, program not starting, residual detergent/water, stopping mid-cycle, noises, poor washing/drying, and stains.
Explains potential causes and solutions for the dishwasher door not opening or closing correctly.
Steps for unplugging, turning off water, and leaving the door ajar to prevent smells.
Procedure to remove residual water droplets from dishes.
Warning against installing the dishwasher near a refrigerator due to high operating temperatures.
Instructions for draining the machine to prevent damage from freezing.
Information on using original spare parts and data needed for service contact.
Details on finding technical information, energy labels, and EPREL database links via QR codes.
Guidance on proper disposal of electrical equipment according to local regulations.
To Next Page