In order to change the rinse aid level, follow the below steps before turning on the machine:
• Touch the programme button and hold it down.
• Turn on the machine.
• Hold down the programme button until “rA” disappears.Rinse aid set follows water
hardness set.
• The machine will display the current setting.
• Set the level by touching the programme button.
• Switch off the machine to save the setting
The factory setting is “4”.
If the dishes are not drying properly or are spotted, increase the level. If blue stains form on
your dishes, decrease the level.
To Next Page
Loading...
Need help?
General
