Heinner HDW-FS4552WE++ - Automatic Fault Warnings; Inlet and Pressure System Faults; Water Discharge and Overflow Faults; Heating, Electronic, and Overheating Faults

www.heinner.com
24
AUTOMATIC FAULT WARNINGS AND WHAT TO DO
TROUBLE CODE
POSSIBLE FAULT
WHAT TO DO
Wash
Rinse
Dry
End
Start/Pause
Water inlet system failure
Make sure the water inlet tap is open
and that water is flowing.
Separate the inlet hose from the tap and
clean the filter of the hose.
Contact for service if the error
continues.
Pressure system failure
Contact for service.
Continuous water inlet
Close for tap and contact the service
Inability to discharge water
Water discharge hose and filters may be
clogged.
Cancel the programme.
If the error continues, contact for service.
Faulty heater
Contact for service.
Overflow
Unplug the machine and close the tap.
Contact for service.
Faulty electronic card
Contact for service.
Overheating
Contact for service.
Faulty heater sensor
Contact for service.
High voltage failure
Contact for service.