IMPORTANT: Do not use industrial chemicals to clean your dryer. Do not use a dryer
that has been cleaned with industrial chemicals.
1. Cleaning the lint filter
IMPORTANT: Do not forget to clean the lint filter after each use.
To clean the lint filter:
1. Open the loading door.
2. Pull up the lint filter to remove it.
3. Open the outer filter.
4. Clean the outer filter by rou hands or
using a soft cloth.
5. Open the inner filter.
6. Clean the inner filter by your hands or
using a soft cloth.
7. Close the filters and fit the hooks.
8. Place inner filter inside of outer filter.
9. Refit the lint filter.
After the dryer has been used for a certain
period of time, if you encounter a layer that
will cause obstruction on the filter surface,
wash the filter with warm water to clean
the layer. Dry the filter thoroughly before
reinstalling it again.
To Next Page
Loading...
