2. Connect it to the branch drain pipe of the trough:
Position outlet hose properly so that the floor will not be damaged by water leakage.
Notes:
If the machine has outlet hose support, please install it like the following pictures.
As the maximum current through the unit is 10A when you are using its heating function, please make
sure the power supply system (current, power voltage and wire) at your home can meet the normal
loading requirements of the electrical appliances.
Please connect the power to a socket which is correctly installed and properly earthed.
Make sure the power voltage at your place is same to that in the machine's rating label.
Power plug must match the socket and cabinet must be properly and effectively earthed.
Do not use multi-purpose plug or socket as extension cord.
When connecting and pulling out the plug, hold the plug tightly and then pull it out. Do not pull power
cord forcibly.
To Next Page
Loading...
Need help?
General
