To avoid fire, electrical shock and other accidents, please remember the following reminding:
Only the voltage indicated in power label can be used. If you are not clear of the voltage at
home, please contact the local power bureau.
When you are using the heating function, the maximum current through the washing machine
will reach 10A. Therefore, please make sure the power supply units (current, voltage and
cable) can meet the normal load requirements for the machine.
Protect the power cord properly. Power cord shall be fixed well so that it will not trip the
people or other things and be damaged. Special attention shall be paid to the socket. It shall
be plugged into the sockets easily and attention shall be paid to the plug location.
Do not make the wall-mounted socket overloaded or cable extended. Overloading of the
wiring may cause fire or electrical shock. Do not pull out power plug with wet hand.
To ensure your safety, power plug shall be inserted into an earthed three-pole socket.
Carefully check and ensure that your socket is properly and reliably earthed.
To Next Page
Loading...
Need help?
General
