Heinner HWM-5080 User Manual

www.heinner.com
48
machine.
Indicator or
display does
not light
Power is disconnected.
PC board has problems.
Harness has connection
problem.
Check if the power is shut down and
power plug is connected correctly.
If not, please call up service line.
Detergent residues
in the box.
Washing powder is
dampened and
agglomerated.
Clean and wipe the box.
Use liquid detergents or the detergents
special for drum.
Washing effects
are not good.
The clothes are too dirty.
Insufficient detergent
quantity.
Select a proper procedure.
Add the proper detergent quantity
according to the instructions in
detergent package.
Abnormal noise
Great vibration.
Check if the fixing (bolts) has been
removed.
If cabinet is installed on the solid and level
floor.
Check if there are any barrettes or metal
articles inside.
Check if the legs in the washing machine
are adjusted level
Remove the problems:
Description
Reason
Solution
Door lock
problem
Door is not closed properly
Restart after the door is closed.
Please call up service line if there are still troubles
Water injecting
problem when
washing (water
injecting time
exceeds 7
minutes)
Tap is not opened or water flows
too slowly. Inlet valve filter is
blocked. Inlet pipe is twisted.
If water is not supplied
Open the tap or wait till the water
supply becomes normal.
Check inlet valve filter.
Straighten the water pipe
Check the other taps in the room.
Please call up service line if there are still troubles
Drain problem
while washing
(drain time
exceeds 3
minutes)
Outlet hose is blocked or twisted
Drain pump is blocked
Wash and straighten outlet hose.
Wash drain pump filter.
Please call up service line if there are still troubles
Please call up the service line if there is any other problem

Heinner HWM-5080 Specifications

General

Brand	Heinner
Model	HWM-5080
Category	Washer
Language	English