Heinner HWM-5080 User Manual

www.heinner.com
45
Clean detergent box and grooves
 Press down the arrow location on softener cover inside the drawer.
 Lift the clip up and take out softener cover and wash all grooves with water.
 Restore the softener cover and push the drawer into position.
Clean the tap filter
 Close the tap.
 Select any procedure except “Wash” or “Drain” procedure
 Press the button “Start/Pause” and keep the procedure
running for about 40 seconds.
 Remove the inlet pipe from the tap.
 Use water to wash the filter.
 Reconnect the inlet pipe.
Washing the filter in washing machine
 Screw off the inlet pipe from the backside of the machine.
 Pull out the filter with long nose pliers and reinstall it back
after being washed.
 Reconnect the inlet pipe.
 Open the tap and make sure there is no water leakage.
 Close the tap
Clean inlet filter
 Inlet filter shall must be cleaned if there is not any or
insufficient water in when the tap is opened.

Heinner HWM-5080 Specifications

General

Brand	Heinner
Model	HWM-5080
Category	Washer
Language	English