1 Safety Instructions and Related Symbols
ARIADNE Knock Control 1
1 Safety Instructions and Related Symbols
This publication offers wherever necessary practical safety instructions to indicate inevitable
residual risks when operating the engine. These residual risks imply dangers to
- Personnel
- Product and machine
- The environment
The primary aim of the safety instructions is to prevent personal injury!
The signal words used in this publication are specifically designed to direct your attention to possi-
ble damage extent!
DANGER indicates a hazardous situation the consequence of which could
be fatal or severe injuries if it is not prevented.
WARNING indicates a hazardous situation which could lead to fatal inju-
ry or severe injuries if it is not prevented.
CAUTION indicates a hazardous situation which could lead to minor in-
juries if it is not prevented.
NOTICE indicates possible material damage.
Safety instructions are not only denoted by a signal word but also by haz-
ard warning triangles. Hazard warning triangles can contain different
symbols to illustrate the danger. However, the symbol used is no substitute
for the actual text of the safety instructions. The text must therefore al-
ways be read in full!
This symbol does not refer to any safety instructions but offers important
notes for better understanding the functions that are being discussed.
They should by all means be observed and practiced.
To Next Page
Loading...