Heinzmann Programmer 2 User Manual

Heinzmann GmbH & Co. KG
Engine & Turbine Controls
Am Haselbach 1
D-79677 Schönau (Schwarzwald)
Germany
Phone +49 7673 8208-0
Fax +49 7673 8208-188
E-mail
info@heinzmann.com
www.heinzmann.com
V.A.T. No.: DE145551926
HEINZMANN
®
Digital Speed Governors
Hand Held Programmer
Programmer 2
Copyright 2007 by Heinzmann GmbH & Co. KG. All rights reserved. This document may not be reproduced or handed on to third parties.
Manual DG 95 106-e / 07-07

Heinzmann Programmer 2 Specifications

General

Brand	Heinzmann
Model	Programmer 2
Category	Motherboard
Language	English

Summary

Safety Instructions and Related Symbols

1.1 Basic Safety Measures for Normal Operation

Basic safety measures for normal operation of the equipment.

1.2 Basic Safety Measures for Servicing and Maintenance

Basic safety measures for servicing and maintenance procedures.

1.3 Before Putting an Installation into Service after Maintenance and Repair Works

Procedures before putting an installation into service after maintenance.

General Information

2.3 Parameter Lists

Classification and organization of control parameters into lists.

2.4 Levels

Description of user access levels for parameter configuration.

Parameterization of HEINZMANN Speed Governors

3.1 Possibilities of Parameterization

Methods and tools for parameterizing HEINZMANN governors.

3.2 Saving Data

Procedure for permanently saving parameter adjustments.

3.8 Reset of Control Unit

Starting the Engine

Configuring the Governor with the Hand Held Programmer

5.1 The Display Panel

5.2 The Control Panel

5.3 Parameter Selection

5.4 Changing Values

Error Handling

7.1 General

General overview of the integrated error monitoring system.

7.2 Error Memories

Managing and understanding the permanent error memory.

7.3 Emergency Shutdown Errors

Errors causing emergency shutdown or inhibiting engine start.

7.4 Error Parameter List

Detailed list of errors, their causes, and appropriate actions.