2
(3)Check the devices of lighting, sound and alarm: check the lights, buzzer and horn
(button on the handle included).
(4) The forward-reverse lever should be in neutral.
(5) Check all the levers and pedals.
(6) Complete the provisions before starting.
(7) Release the parking lever.
(8) Make trying operation of the mast for lifting, lowing and Fwd/Bwd tilting and the
truck for steering and braking.
4.Operation of Forklift Truck
(1) Only trained and authorized operator shall be permitted to operate the truck.
(2) Wear all the safety guards, such as shoes, helmet, clothing and gloves while operating
the truck.
Check all the control and warning devices before starting the truck. If any damages or
defects are found, operate it after repairing.
(4) At the rated loading center, either overload or overload operation is strictly prohibited.
The center of cargo should be in line with the frame center, not out of the line. The fork
should insert completely under the cargo and make the cargo placed on it evenly. Do not
raise an object with one fork end.
(5) The starting, turning, driving, braking and stopping operation of the truck should be
done smoothly. When steering on the humid or low friction road, the truck should be
decelerated.
(6) Travel with loads as low as possible and tilted backward.
(7) Be careful when traveling on a slope. When climbing grades with a slope of more
than 10%, the truck should forward travel, and when descending so grades, backward
travel. Never turning on a slope. Avoid loading and unloading operation when
To Next Page
Loading...
Need help?
General
